View Single Post
  #28  
Old 01-18-2025, 11:14 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Do this. set the G-2 & drive controls to mid range.
Measure the CRT voltages & wright them down. Do NOT measure the
focus pin ! All 3 guns should be about the same. If one is way off
on the red find out why.
Another test. Turn the G & B G-2's all the way down. Bring up
the red & see if you get red. If you dont get red leave the set on
for 1/2 hr & see if it comes up with warm up at all.
Zeno
Reply With Quote