View Single Post
  #22  
Old 01-16-2025, 11:23 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by vortalexfan View Post
Now this is where I'm kind of confused in how this CRT Tester works and if maybe I'm doing something wrong and maybe why I came up with a "dead" red gun result in my test, the instructions for this tube tester makes it sound like there is actually supposed to be a 4th setting for the CRT emissions/Cutoff test but when I actually go to flip through the settings there's only 3 clearly discernable settings on the switch. The Instructions for the Cutoff/Emissions Test reads as saying that if you're testing a B/W Tube you leave the tester's test mode switch in the B/W setting but if you're testing a color tube you need to switch it to the Red setting and follow the directions for the test and repeat the directions for the Green and the Blue settings.

But there's clearly no separate settings for B/W and Red it acts like (and its marked as such too) that the B/W and Red test settings are one in the same setting on the CRT Tester.
You are correct. The 3 position switch simply selects which color gun you're testing. So you need to re-set the cutoff control for each gun when you move between the 3, because there's no memory of the 3 cutoff settings. Some fancier testers have 3 separate cutoff controls and 3 meters so you can compare all 3 color guns simultaneously.

Last edited by Kevin Kuehn; 01-16-2025 at 11:27 PM.
Reply With Quote