View Single Post
  #21  
Old 01-14-2025, 03:01 AM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
OK, So I have a Question concerning picture tube checkers, I have a B & K Model 465 CRT Tester that was given to me for free more or less by someone locally that I bought a couple of old radios from on Facebook Marketplace, and when I tested the Picture tube on this TV on this CRT Tester the Green and Blue guns tested like brand new yet (the meter was pegged out at the top in the emissions test) but then the red gun didn't budge the needle at all (it was showing no cutoff and the red gun was registering all the way at the bottom of the meter) This CRT Tester I have uses a switch with 3 positions: Position one (If I'm understanding this correctly) is the B/W test setting and also the Red Gun test setting for when you're testing color picture tubes, then the second setting is Green, and the third Setting is Blue.

Now this is where I'm kind of confused in how this CRT Tester works and if maybe I'm doing something wrong and maybe why I came up with a "dead" red gun result in my test, the instructions for this tube tester makes it sound like there is actually supposed to be a 4th setting for the CRT emissions/Cutoff test but when I actually go to flip through the settings there's only 3 clearly discernable settings on the switch. The Instructions for the Cutoff/Emissions Test reads as saying that if you're testing a B/W Tube you leave the tester's test mode switch in the B/W setting but if you're testing a color tube you need to switch it to the Red setting and follow the directions for the test and repeat the directions for the Green and the Blue settings.

But there's clearly no separate settings for B/W and Red it acts like (and its marked as such too) that the B/W and Red test settings are one in the same setting on the CRT Tester.

Does anyone here have any experience with this particular CRT Tester or ones similar to this and if so how is it supposed to work, because the Instruction manual is leaving me with more questions than answers, and also how common is it for one single color gun to just randomly die on a TV when the rest of the color guns test super strong yet, and also is it possible that the picture tube is actually good yet on all three guns and I just wasn't testing the Red Gun Correctly?

Any help with this issue would be appreciated.
Reply With Quote