View Single Post
  #5  
Old 11-22-2024, 03:47 PM
user181 user181 is offline
VideoKarma Member
 
Join Date: Nov 2013
Posts: 462
White Balance Failure - Sony KD-34XBR970

About a year ago, the set was having an issue with the image in which there was some horizontal smearing in the picture that was most noticeable when the picture had a dark colored area right next to a white or lighter colored area. The smearing looked reddish. It also had some faint horizontal streaks or lines in the picture. This had been going on for some time.

But then one day (about a year ago) while the set was on, there was a very quick 'zap' noise from the set. It was so quick I didn't even realize where it was coming from at first. My daughter was in the room and heard it too. From that point onward, the issues with picture were gone.

I've never been sure what the noise was, and have wondered if it was either a component that will eventually fail, or if dust/debris maybe created a partial short somewhere that cleared itself. But the picture was instantly improved.

The service manual mentions IC9001-9003 which are video output amplifiers for the 3 colors, so I'm wondering if those could be related to the issue from the past and the "white balance failure" error code now.

Last edited by user181; 11-22-2024 at 03:51 PM.
Reply With Quote
Audiokarma