
10-11-2024, 02:31 PM
|
 |
M is for Memory
|
|
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
|
|
Quote:
Originally Posted by Yamamaya42
I have finally found the source of the loss of picture (brightness ) that happens once in a very great while with this set, all this time I have been keeping the back off in hopes of nailing it down, this week I did, the brightness pot, R2 is on the front, like the color and and volume, but unlike being hard wired in the RCA and GE sets that amused bandersen a bit,  this one can be unplugged, and THAT is the source of the problem, weak connection in PL3, the connector to the brightness pot on the front, I DID clean them, but this one is still giving me trouble, when I lose picture, I grab the wire, move it a bit, and it comes back.
|
Its not uncommon for the pins in the plug that have wires in them to develop bad solder joints...It's especially common in CRT heater pins to the point that they made a special repair tool to crimp the pin onto the wire...If there isn't a service reason to have it unplug you could hard wire it...last year I had to hard wire one terminal of the chromatic switch socket because it was less of a PITA than replacing the whole thing (not like I had a replacement either).
|