|
Hi Arc, I'm aware of the electrolytic caps issue, they are the elephant in the room :\ I saw caps in the main camera power supply module (9V, 9.5V) and also some high capacity, high voltage ones around the high-voltage transformer for the grid, and were of my concern
not that you mentioned them, I see 9 and 9.5v also feed the PA, the K discharge circuit and the high-voltage transformer so might be the single root cause for the two issues..
thanks for the suggestion, do you think there a way to test them without desoldering?
for the video download, once you click on the google drive link and the video preview opens, there is an icon on the top right part of the page , an arrow down, you should be able to get it from there
Last edited by platux; 09-28-2024 at 03:59 AM.
|