Quote:
Originally Posted by Alex KL-1
so is intriging to see no service mode correction for it... especially since it indeed are supplied by the TDA95XX.
Having fixing these type of TV for more than 4 years, I noted that are indeed variable the setpoints for V and H settings, due to tolerances.
I just remembered something... some sets, I don't remember the maker, had 2 different service modes; one being for common adjustments, and other for advanced. Also, some have a messy menu, with H parameters spread in all pages of service mode, or with uncompreensible abbreviations.
|
These are the possible adjustment paramters available in the (SAM) service menu under geometry:
- HP 30
- HB 32
- HSH 32
- VSL 32
- VAM 36
- VSC 20
- VSH 30
- SBL OFF
- H60 9
- V60 -2
I tried adjust these but none was fixing the pincushion for me.
My next step will be to replace all the componentes in the EW circuit and the above that you mentioned. Mostly the filmcaps and diodes if there's something hiding that I can't see when measured. Trail and error if you will.
I'm getting a bit desperate here