View Single Post
  #3  
Old 09-04-2024, 11:17 AM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paraná)
Posts: 515
Quote:
Originally Posted by Claustrofob View Post
According to the service manual on page 68, panorama is only for 16:9 sets. This is a 4:3. And I don't have that circuit on the chassie of this model.

There's no parabola parameters either in the service menu of this model. I can show you later what I have.

I've checked all parts in the EW circuit and they all checks fine but will check again.

The last thing to check is everything in series with the yoke, I guess.

I noticed yesterday that L3 is very unstable, jumps from 130-150 V back and forth. I don’t know if that’s normal?
Is good to not take any measurements from L3 test point, since it can have up 1500V of peak voltage (the retrace interval), so it plays havoc or destroy meters.

The E-W MOSFET is feed from µC as show in the schematic?
Since you have schema, also not hurts if you play a little with the R values near the E-W MOSFET. Any bad progress and you can revert to original.
__________________
So many projects, so little time...
Reply With Quote