|
Is possible to have simply the wrong adjusted parameters but, is good to check some parts in the E-W circuit and the HOT, such as:
2401 (ESR included)
2465
2462 and the ones in parallel
Failure in any of them will distort or shrinks the image.
BTW, for some models, the E-W correction are not fully effective and can have pincushion under some conditions.
For adjusting parameters, is needed the service manual with the access code or key gimmick.
PS.: here some very close model are in the market, with the major physical difference being the Video Component and/or S-Video in place of SCART.
__________________
So many projects, so little time...
Last edited by Alex KL-1; 09-03-2024 at 06:29 AM.
|