View Single Post
  #7  
Old 06-05-2024, 02:50 PM
Aperna1985 Aperna1985 is offline
VideoKarma Member
 
Join Date: Feb 2018
Posts: 187
Quote:
Originally Posted by Yamamaya42 View Post
Be meticulous, starting from the det V6 to the CRT V20, check every coil and resistor, it could be any number of things. I normally take a green marks all ink marker, and put a little green dot on things that check 10-15% to what they should, and think about replacing parts that don't.


Okay, so I shouldn't be trying to move back from the CRT I should be trying to move towards it when I'm troubleshooting? I was thinking start at the closest point to the crt and inject a signal if it works there l move back one section and do it again until it doesn't work.

Last edited by Aperna1985; 06-05-2024 at 02:54 PM.
Reply With Quote