View Single Post
  #5  
Old 06-04-2024, 07:31 AM
tubesrule's Avatar
tubesrule tubesrule is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Michigan
Posts: 331
As was previously pointed out, almost all pre-war sets were manufactured in 1939 and 1940. Overall sales were much lower in 1940 so manufacturers were not willing to spend the capital to design new sets. RCA actually sent a letter out to employees on March 26 1940 offering deep discounts on existing sets. A TRK12 went from $600 to $250 while a TT5 went from $199.50 to $75.

In 1941 RCA sent a letter to all owners of their sets stating they would realign the sets for audio (slope detection) at no cost. No adjustment is needed on any pre-war set for 13,230Hz vs 15,750Hz as the horizontal controls have enough range and the width can be touched up.

GE sets were all designed by internal engineering in Schenectady and shared nothing with RCA other than purchasing RCA manufactured CRT's. GE also sourced MW series CRT's from Philips in Holland for the HM225 and HM226-7A sets which caused issues between GE and RCA resulting in RCA sending inferior CRT's to GE. (documented by the GE engineer charged with fixing the situation)

As for NTSC compliance, RCA was none to eager to jump on the FM bandwagon after having shut out Armstrong and his FM experiments at RCA only a few years earlier. Armstrong found a supporter in GE who built the first FM receivers, GM-75 in 1938 and HM-80 in 1939.

I have W.R.G.Baker's HM226-7A television that was updated for FM sound by GE engineering. The audio IF's were changed to unique non-adjustable units about 1/3 the size of the production ones while a 6AC7 Limiter and 6H6 Discriminator were added. This however appears to be a one-off.

The only NTSC compliant pre-war production set I am aware of is the GE M90 which has an unusual history. These all started life as the HM275-3A in 1939.

They were basically unchanged from the prototype GM295 except for the addition of a AM/Shortwave radio of dubious design (that's what the -3 is for in GE nomenclature, the number of tubes in the radio) containing only a single tube Conv/Osc, a single IF stage and a detector. It is assumed that since these sets were the top of the line they would most likely only be sold in and around New York and didn't need a sensitivity radio, although it's still an odd choice for the top of the line television. For comparison, the HM226-7A uses one of their standard 7 tube radio chassis with excellent performance.

For what ever reason, GE decided not to sell the HM275-3A of which 75 were built according to an engineers account. These of course were not NTSC compliant at this point.

In 1941 they decided to modify the existing HM275-3A's for NTSC adding a 6AC7 Limiter and 7K7 discriminator and rebrand them as M90's under their Musiphonic line of products. Oddly the original blueprint I have for these sets calls them HM275-3B and not M90. The M90 label on the back of the sets was hastily affixed over the existing HM275-3A label and many times parts of the HM275-3A label are visible.

The M90 sets were sold to the public so I believe this is the only NTSC compliant pre-war television sold.
__________________
Converters for obsolete standards:
www.tech-retro.com/aurora-design/legacy.html

Last edited by tubesrule; 06-04-2024 at 09:03 AM.
Reply With Quote
Audiokarma