View Single Post
  #24  
Old 05-28-2024, 08:30 PM
pac.attack76's Avatar
pac.attack76 pac.attack76 is offline
Stuck in the past
 
Join Date: Mar 2013
Location: Michigan
Posts: 1,311
Quote:
Originally Posted by JohnCT View Post
Yes, you remove the red lead from the V, diode, ohm hole and move it to the ammeter side. Depending on your meter, it may have one or two holes for the ammeter side - one low (like below 400ma typically) and a higher one for several amps or more.

The black lead stays put.

John

EDIT: make sure to remove the lead from the ammeter hole when done as it presents essentially a dead short across the leads and you don't want to measure voltage in that manner.
Ah ok, move the red to top one. I've never used that one. First time for everything 😂
Attached Images
File Type: jpg IMG_20240528_200759621.jpg (78.6 KB, 30 views)
__________________
Genesis does what Nintendon't
Reply With Quote