Quote:
Originally Posted by timmy
Ok the resistor is not an issue but why or is it normal for a to92 pnp transistor to show continuity if you put negative probe on center and probe each outside leads with the positive in diode check? ? I have new nte ones and they do it also. The transistor is a bf506 and I have an equivalent nte159 but yet the nte don’t seem to work.
|
Test by lifting the E & C. Do not touch the wires with your hands.
Use the base as common. One way you should get @ .7 v the other open.
Check E-C also, should read open.
Zeno
