|
Think of a tube as a valve (the British term for it), because that's what it does, it valves or regulates electron flow. In a triode, the grid is the control element. Negative voltage on the grid (with respect to cathode) is the bias voltage. It
controls how much current flows from cathode to anode(plate). More negative equals less current, less negative equals more current. So you want the bias point to be fixed midway between minimum and maximum plate current swings, i.e., the idling current. When a small signal is applied to the grid, it "valves" a corresponding LARGE flow of plate current. The bias point being fixed midway gives the best linearity to the amplified signal (which appears across the plate load, which can be a resistor, an output transformer, old-school headphones, etc.).
|