View Single Post
  #8  
Old 09-11-2023, 12:38 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
Symptoms remain foldover on right side, lack of width and loses H sync. So few components but all that left is two transformers. T2-T3 on Sams schematic. T5-T6 on Motorola schematic

After replacing each of the mica caps 20, 200, 680 and 900 pf no improvement was noted. The resistors all checked - except one a bit higher than 10% - no change.

The negative voltage on grid of horiz osc supposed to be 50 but reads much higher, like 130! I tried freeze spray on both transformers after it fails, no change.

This is how it looks as it fails, image gets more lines, loses sync finally shrinks horizontally into a line
Attached Images
File Type: jpg TS-18 issues.jpg (56.9 KB, 25 views)
File Type: jpg TS-18 a.jpg (97.4 KB, 21 views)
__________________
"When resistors increase in value, they're worthless"
-Dave G

Last edited by DavGoodlin; 09-11-2023 at 12:49 PM.
Reply With Quote