View Single Post
  #41  
Old 07-17-2023, 12:00 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by Electronic M View Post
It's kinda wasteful to replace a good working flyback because it doesn't look good. There's not a limitless supply out there.

I've seen mint looking flybacks be dead and I've ran destroyed looking flybacks for years.... Electricity doesn't care what the path looks like as long as the path functions.

Flybacks and HV cups clean up nicely with off the shelf rubbing alcohol, and tougher dirt can be removed with spot treatments of Goof Off....Heck severe carbon tracking can often be permanently cured by Dremeling out the carbonized bit of insulation and replacing it with silicone caulk.
I forgot to mention I am keeping the old flyback for repair and cleaning just like I am doing with the old ford philco flyback. Either way I had to remove them and figured that since I did I might as well put the new ones in each to save time and rule out the flybacks when diagnosing the current issues. I definitely have no desire to throw out the old flybacks though. I am pretty confident I can seal them out with electronic grade silicone among other little things to help fix any arcing they themselves may have.
Reply With Quote