Quote:
Originally Posted by jr_tech
“won't putting in the 82s w/o being able to reach in and unhook the old C1 cause undue stress on the diodes?”
I suspect C1 sections are now effectively much less than 80 uf, and wouldn’t worry about the diodes. Also, thermistor should limit inrush current.
jr
|
will try sat.
http://suzaku.live-evil.org/0605232106a.jpg
best pic so far!
6LM8 NOS did seem to help
found why I was getting such a snowy pic
I am missing a tuner bias!
http://suzaku.live-evil.org/tuner111.jpg
bias source 1 is not there, which powers the RF amp. problem with R240?
in the mean time till i can pull the chassis, i took a 18 ohm resistor and hooked it to the B source 2, and it now has a clear pic.