View Single Post
  #78  
Old 05-03-2023, 12:52 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by Electronic M View Post
PIO caps in tube gear are usually Japanese made and usually found in Japanese made TVs (Motorola used some Japanese made parts as it was trying to get friendly with Matsushita), and they tend to be bad (electrically leaky).

The tubular ceramics were made by a variety of companies across 3 decades. I've seen some sets where they were fine and I've seen some sets where they were open or shorted. In GE Portacolors they tend to explode and spray bits of conductive foil all over the circuit board. In the newest application I'm familiar with Zenith 22-5001 safety caps used in CCII TVs of the 70s they're used in the flyback circuit and when they open they cause the HV to skyrocket, and if they short they trip the breaker on the TV...
Yeah sometimes they do actually work and are ok, it is kind of a gamble. I don't believe that wax paper ceramic caps can be reformed at all like electrolytics can they? Regardless after seeing what happened to one in my motorola, and how it just suddenly blew up and flung ceramic shrapnel out the tv....yeah I will never trust those caps ever again. Ceramic safety cap fool me once, shame on you old wax paper safety cap. Fool me twice? Not gonna be a second time for that lol.
Reply With Quote