View Single Post
  #10  
Old 05-03-2023, 12:37 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by n8nagel View Post
Interesting. My only experience with "really" old stuff is two receivers from the early 60s, which mostly used the axial "ceracaps" not the disc types like you're thinking of and a few electrolytics. I have been told by different people that the ceracaps are usually good and also that they're garbage, answer depends on who you talk to LOL. All I actually know is on my H.H. Scott receiver one of the ceracaps just got replaced because that and a couple weak tubes were what was keeping the MPX from working correctly. Most PIOs in audio land are actually for speaker crossovers and there they tend to have indefinite life. I don't think I've seen many films in tube gear, only more modern solid state stuff and again in speaker crossovers, so they don't get exposed to really high temps unless they're in a power amp and even then they're usually away from the output transistors.
PIO caps in tube gear are usually Japanese made and usually found in Japanese made TVs (Motorola used some Japanese made parts as it was trying to get friendly with Matsushita), and they tend to be bad (electrically leaky).

The tubular ceramics were made by a variety of companies across 3 decades. I've seen some sets where they were fine and I've seen some sets where they were open or shorted. In GE Portacolors they tend to explode and spray bits of conductive foil all over the circuit board. In the newest application I'm familiar with Zenith 22-5001 safety caps used in CCII TVs of the 70s they're used in the flyback circuit and when they open they cause the HV to skyrocket, and if they short they trip the breaker on the TV...
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Audiokarma