Quote:
Originally Posted by Chris K
I've searched through the forum and found several threads with solutions but I'm wondering if there's a consensus on the best setup to replace this failure prone unit. I'm installing a 12QP4 with an ion trap so the delay warmup really isn't necessary??? I don't know if that's the only reason for it. Can I just close it and not worry about it?
|
The relay is there to protect the caps from the classic inrush at power up.
given that C6 is rated at 4uf at 150v, a good guess is that coil voltage was around 100v
so something like this may work.
https://www.mouser.com/ProductDetail...0X22clig%3D%3D
never hurts to try!