Quote:
Originally Posted by bandersen
Ground for the composite source connects directly to B-. Anything 0.01 and up for the connection between the composite signal and tube grid as Yamamaya42 said.
So what I'm thinking is that the 6AU6 plate is being shorted to something and the screen is acting as the plate to get a signal for the audio. What voltage do you have on the plate and screen (pins 5 and 6)? How about the 6.8K, 4.7K resistors and 20uF cap?
Good luck!
|
Thanks Bob and I will check those values and post later tonight. Do you want to know voltage on the resistors? They have been replaced already with 5% value resistors. I did that after I started troubleshooting issues from the video amp to the CRT, and the originals were spot on anyway. Timmy has graciously offered to get it going and we've worked out a shipping scenario but I'm willing to give it one more shot before bubble wrap, Styrofoam and a corrugated box!