View Single Post
  #25  
Old 03-24-2023, 07:25 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Chassis has been thoroughly cleaned with a toothbrush to help loosen up residual dirt, all tubes have been tested with multimeter for a basic filament test already, sockets cleaned.

Diodes have all been checked out and tested and appear to be ok. Some weird looking tophat shaped diodes are on this chassis. I guess these were a thing once upon a time. Also some normal glass package germanium diodes, along with fairly normal looking diodes.

Still unsure of the exact reason this tv was no longer being used ages ago but clearly has something to do with the HV and horizontal output tube. The 6JS6 tube does look a bit used visually but I do not have the a tube tester atm to do anything more than a filament test. It is quite possible though that the 6JS6 tube may have failed in this tv. It would hardly surprise me since it is common for horizontal output tubes to fail in tvs directly on their own from use or as a consequence of something else failing.

My current guess is still tobacco smoking contributing to tar buildup in the HV area which likely caused arcing.

Next step is to use a dremel that I recently bought to saw off the can caps, leaving terminals in place and recapping. Also will have to check the transformers including the flyback with a multimeter eventually.
Reply With Quote
Audiokarma