View Single Post
  #58  
Old 03-19-2023, 02:35 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Ok, it looks like it was just a loose connection and I made sure all connections were secured this time. Vertical deflection is back. I tried my best to fine tune the rf signal i was getting from the digital to analog converter box. Also adjusted AGC, Contrast, brightness, horizontal sync, vertical sync ect. I also used my color king test pattern generator.

Based on the photos the convergence is way off and possibly color purity as well. But the most important issue to fix is the weird multiple images that seem to occur along the horizontal.

I am going to check the horizontal sweep frequency later with my oscilloscope and see that the horizontal sweep is at 15.75khz.

I suspect leaky caps in the horizontal circuit possibly. As for the lack of green color. This was later found to be a simple issue with the green video driver pot. on the drive board. It is just a bit finicky and I forgot to clean those. So green does work just did not realize the issue with that until photos were already taken.

https://imgur.com/a/ZcWcEWl
Reply With Quote