|
The picture is over bright and the fuzziness around the text and numbers are artifacts from the camera. Picture is crisp and bright. Lateral waviness is still there but not as noticeable.
Should I replace the detector diode? Would it make any difference with regard to this horizontal issue? Should I just wait for all of the NOS tubes to come and start troubleshooting then when the tubes are off the table as an issue?
Weird Question...the centering tabs on the rear of the yoke...there are 2 of them on this model and they might have gotten moved in the disassembly/reassembly. The image is centered in the screen. Can they have an effect on this? The doughnut shaped plastic back cover of the yoke that has the centering tabs on it is a bit warped and it came off the yoke when I pulled the chassis out. It clips on the yoke with tabs and the tabs are not keyed so it is possible to reassemble the yoke and back cover/centering tabs 60, 120 or 180 degrees out of phase when I put it back on. Still, the picture is centered. Just asking so I'm not missing anything obvious.
Thanks
Chris
|