Quote:
Originally Posted by Electronic M
No that is not normal. Either the doorknob is leaky, the insulation on the HV rect filament winding failed, or dirt and carbon tracking made a new path somewhere.
I'd de-solder the filament winding and check it...If there is any measurable resistance to ground from the winding replace the winding. Any wire rated for 15KV or better should be fine.
|
That could also be the case, like it was in my Hoffman Colorcaster (ugh, what a mess.) but I find it a strong sign that he stated that he saw 12m on pin #6, which should have nothing connected to it, that there is krud under the socket.