Thread: Magnavox T931
View Single Post
  #49  
Old 01-14-2023, 02:01 AM
LukeSimon LukeSimon is offline
VideoKarma Member
 
Join Date: May 2021
Posts: 183
Tuning the horizontal efficiency coil according to the Sams procedure first resulted in a minimum cathode current of 195mA, but the horizontal linearity wasn’t good in the transition area between the damper diode and the horizontal output amplifier.



Here is the 240p Test Suite vertical stripes test pattern, where the stripes in the transition region are closer together. The white stripes in the transition region are slightly brighter because more cathode ray current hits the same phosphors due to a slower horizontal deflection in this region. Sams calls this “foldover”, and says to turn the adjustable core of the efficiency coil clockwise to eliminate the non-linearity, but not to the point where cathode current exceeds 230mA.


Here is the best linearity that I could achieve, and it is at 230mA cathode current. A lower cathode current results in more non-linearity.
Reply With Quote