Quote:
Originally Posted by ARC Tech-109
Waveform coil only pre-distorts the actual sawtooth to compensate for the non-linearities of the yoke and flyback similar to the vertical linearity adjustment, the efficiency coil tunes the horizontal section and should be adjusted for the minimum cathode current. I strongly recommend installing a 0.1uf 50V or greater bypass capacitor between the cathode terminal at the socket and the chassis before placing a meter on the measurement lead. This will bypass the high frequency from the meter and give you the real DC current without detuning the flyback circuit. I burnt up a meter without a bypass capacitor.
|
I have a Seco HC-8 for testing the horizontal output current in circuit.