Well my first Zenith sure is going to be a wild ride. Schematic and manuals showed up today, was going to start troubleshooting on that color problem and do some voltage readings on the chroma board. But my Zenith had another idea. No picture came up today. Checked for HV and got none at the CRT. So guess switch gears to fixing this problem. I probed with my HV probe a few connections at the trippler and the flyback and didnt get anything. Not sure where I should poke next. Also I noticed something interesting on the vertical module, looks like someone tacked on a resistor from ground to a point on the module pin.
https://photos.app.goo.gl/WRuYqAmjUbcUmhyLA