View Single Post
  #835  
Old 10-27-2022, 01:20 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by Yamamaya42 View Post
More likely than not, the data on the SAMs is in error, and 6.3k is correct.
You should really look into what Squirrel Boy mentioned, and try injecting IF signals into the string at the various stages via the grids of the tubes, (pin 2), using a decoupling capacitor to protect the tuner subber from any voltage that may be on the grid.

Since you can't place the chassis in service position for this, or have a tube test socket, you will have to get something like some 30 Gauge Wire Wrap Wire, and wrap a few turns around P2 of the tube of the stage under test, as this has to be done with it hooked up fully to the CRT to see if you get a picture.
+1 basically your using your tuner subber like a B&K analyst's IF output....Only I'm not sure why you bought the subber instead of an analyst in the first place....I never use my tuner subber, but I use my analyst more than my scope (it's probably second to my DMM interms of use).
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Audiokarma