View Single Post
  #834  
Old 10-27-2022, 01:05 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,255
More likely than not, the data on the SAMs is in error, and 6.3k is correct.
You should really look into what Squirrel Boy mentioned, and try injecting IF signals into the string at the various stages via the grids of the tubes, (pin 2), using a decoupling capacitor to protect the tuner subber from any voltage that may be on the grid.

Since you can't place the chassis in service position for this, or have a tube test socket, you will have to get something like some 30 Gauge Wire Wrap Wire, and wrap a few turns around P2 of the tube of the stage under test, as this has to be done with it hooked up fully to the CRT to see if you get a picture.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote