|
I would think that the use of foil over the solid aluminum tube was a cost cutting choice.
Out of all the kits Peter sold maybe half of them were ever built I bet.
Of the ones that were built not all of them were ever gotten to work correctly.
Most of the working ones are stored someplace inconvenient to access for the purpose of comparing to yours.
I think there should be some way of determining if the problem is in the light sensor and lamp electronics or the synchronization system.
I think it would be very useful if you looked at the signal from the camera with an oscilloscope while using a simple pattern in front of the lens.
Something like a card with the top half white and a bottom half black.
Since there is no blanking signal, if you displayed an entire frame on the scope you should see something like a squarewave at 30Hz.
Seems to me that if you described the image as garbled that the problem is with synchronization.
|