View Single Post
  #36  
Old 10-08-2022, 12:38 PM
rld-tv01's Avatar
rld-tv01 rld-tv01 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: Seal Beach, Ca
Posts: 722
As Dave and I seem to have the same problems / operational peculiarities I was wondering if the "3m super 77 spray adhesive" we used to fasten the aluminum foil mau have reached end of life? I am a retired computer software engineer and back in the 1980s I was on a contract with the LA department of Water and Power. They found out the Glue they used on PVC pipes had a life span of 10 years and they needed help on a computer program managing pipe replacement in the entire city of LA. I built my camera 15-20 years ago and wonder if the adhesive may be contributing to the problem.
At this point I think a partial rebuild in instore. The 3m spray adhesive is $6.50 at home depot. While I got the P.E. tube off I can realign the lens optics and unsolder/resolder old solder connections. With other project I'll have to work on this a little at a time.

BTW, I have a 2nd different Mechanical Kit from Peter Yanczer. It consists of two aluminum disks with laser cut holes, two motors and a set of disk hubs. It is in a box in storage never built. This mechanical camera / receiver corisponds to his book and his early television newletters. I also have a Western Visionette from 1932 sitting here on the shelf at home. I had hope of building that Yanczer kit and eventually using that camera to drive the Visionette.
Reply With Quote