View Single Post
  #23  
Old 09-27-2022, 05:22 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
Quote:
Originally Posted by zeno View Post
Shango just started on a similar one.

https://www.youtube.com/watch?v=hqH8dZuUuoQ

If yours is solid state it will need every small electrolytic in the
hoz & vert & every control cleaned. They were that way even at 5 yrs
old. They will work good then.

73 Zeno
LFOD !
We saw alot of "little" Sears stuff come in the shops I worked in here in eastern PA over 40 years ago. Still, we knew they were as simple as a GE S-2 LOFL, and people wanted them fixed. Also, I knew they were Japanese unless 528/529 prefix, with tubes not stocked for any set over 10 years old.

If the elder-boss wasn't in to turn them away for that reason, I would write them up and quietly source that 4DK6 (or whatever) at home, then say "hey look what I found?" and if the boss was in that day, he'd say it's a "bastard" number he did not remember ordering.
The bad caps responded to freeze spray back then, dirty pots responded to Lube a trol.
__________________
"When resistors increase in value, they're worthless"
-Dave G

Last edited by DavGoodlin; 09-27-2022 at 05:30 PM.
Reply With Quote