View Single Post
  #322  
Old 09-12-2022, 08:00 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is online now
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,254
For something like losing vertical sweep, you will have to set the chassis up in the service position, if you have not done so already.

The makers of the set have anticipated the need for this, and normally left all wires long enough to prop the chassis up behind the set for easy access and still hook everything up, you just need to be sure the CRT is grounded.

Vertical deflection is dependent on 640v boost via 3 points, vertical height, vertical lin, and the output via C5, if this 640v boost has failed, or the parts it feeds have failed, vertical sweep will fail.
But to have boot voltage in the first place, horizontal sweep/ HV has to be working.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote