View Single Post
  #240  
Old 09-07-2022, 08:24 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,254
As mentioned before, it's best that you have a set of known good (NOS) IF tubes, 2, 6EH7s 1 6EJ7, and new tuner tubes.
And it looks like you have the coil/core type tuner vs the rotary switch type, these type have a bad habit of getting dirty contacts (black), making tuning impossible, the best way most have found to clean them was to remove the tuner cover, and clean them with a pencil eraser and solvent like isopropyl alcohol or the like, until the contacts are bright and shiny, making sure not to leave any bits of eraser behind.
If the tuner has not been cleaned already, there is a good chance that the contacts in there are all black and dirty and a source of trouble.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
Audiokarma