there is a diode check feature on your meter.
http://www.instrumart.com/assets/uei...nix-manual.pdf
you have to make sure it is diode mode, not sure what button to press but when in the right mode, a diode symbol should be seen on the display.
https://www.youtube.com/watch?v=Rj9WpoaX2Gk
how the test is done
there should be easy access via pins 2 and 4 at L6.
diode mode is the only way to really test it.
resistance checks wont tell you anything, in diode check mode, one way should be about .5xx on the meter ( give or take) and the other much higher, as seen in that video.