View Single Post
  #44  
Old 09-05-2022, 11:33 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by zeno View Post
If you are chasing a specific problem you can tack in a cap
of the same value & voltage as a test.
If not leave it be for now.
If you are recapping the set just do a few at a time & recheck as
you go. Its always best to get the PS running first the Hoz/HV
then vert. In other words one stage at a time. Mass recapping
very often leads to a broken set thats MUCH harder to fix.

73 Zeno
LFOD !
I 100% agree with this. I will only start with the known bad caps first and go from there if necessary just so things will not get too mixed up. On a side note. What are your thoughts on "picture tube brighteners". I have one that was given to me and it is for 90 degree angle rectangular color picture tubes. It basically uses a small transformer to step up the voltage and increase the brightness on a dim/dark weak crt. Is there any drawback to this? I may use that as a temporary remedy for the CRT until I find a suitable replacement for the high hour crt in the set.
Reply With Quote