View Single Post
  #40  
Old 08-31-2022, 09:57 AM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by Notimetolooz View Post
Electronic M has a point. I could go either way with this.
However if you are a newbie to this kind of stuff (and you sound like you are) you may create more problems than solve them.
Not only do you have to get the type, value and voltage rating right but you must not make a mistake connecting to the right points. With electrolytic caps you also get the polarity right. It takes a level of concentration that someone that has done a lot of can take for granted. I have come to this conclusion after helping many newbies.
I would definitely replace the electrolytic caps, those almost always have a metal case even if that is covered with a plastic film or cardboard.
You really should get the service info on the set, that may clear up some facts like the type of capacitors and where they are in the circuit.
Yeah I am going to be very careful and take my time with this recap and repair for sure. I will also check everything over before I attempt to power back on. I am taking photos of everything in the chassis as well after and before each step. I do have the sams photo fact for this tv luckily but it only seems to state if a capacitor is electrolytic or not. The part list makes no disctinction between ceramic, mylar, wax paper ect though.
Reply With Quote
Audiokarma