View Single Post
  #4  
Old 07-10-2022, 11:03 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Jeffhs View Post
You are correct as to the spelling; it is "Curtis Mathes." These were excellent TVs and combination systems; I knew a family years ago in my home town who had one. Theirs was, IIRC, a three-way console (TV, AM-FM-stereo FM tuner, and phonograph) and had, again IIRC, a round CRT.

The TV chassis in these combos may have been RCA clones, but were good sets nonetheless. RCA, after all, was a pioneer in electronic television, so they did not skimp or cut corners anywhere. My first color TV, in fact, was a Sears Silvertone table model, with an RCA CTC-12 (IIRC) chassis and a round CRT. The set lasted me about three years, then, when I tried to replace a tube, one of the video circuit boards cracked and ruined the set for good, to my utter disappointment.

I found another Sears (RCA) TV, this one with a 17- or 19" CRT (again IIRC), a few years later; this set, thankfully, lasted me much longer than the larger round Silvertone set did. I got rid of that 17" Silvertone when I bought my first new color TV, a Zenith 13" portable. I bought another Zenith 13" portable, this one with one-knob electronic tuning, a few years later. When digital TV came along, I put the Zenith TVs in storage (eventually getting rid of both when I moved in 1999) and bought a 19" Insignia HDTV, replacing it a few years later with my current TV, a 32" Insignia flat screen.

BTW, many if not most color TVs made in the 1950s to about the 1970s did incorporate RCA chassis; these sets, however, had many different brand names on the cabinets, not just RCA. These TVs were marketed under almost every major brand you could imagine, except Zenith; for some reason, Zenith either would not or could not use RCA chassis in any television bearing the Zenith brand name--maybe it was a copyright issue.
Motorola never used an RCA chassis either! They had their own design. Many techs didn't think much of them!
All the other firms, even the private labelers bought genuine RCA built chassis, up to and including the CTC15. After RCA came out with the CTC16, they allowed the other firms to clone the CTC15.
Getting back to Curtis Mathes, I worked on a cheapie, 1968 roundie CM set. It was a clone of that lousy CTC20.
Reply With Quote