View Single Post
  #13  
Old 06-06-2022, 01:56 PM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
I played with the vertical again yesterday and got it a bit better. Its still got problems at the bottom.
The vertical linearity control is all the way clockwise. The vertical was the circuit
that originally sick, but I never found anything wrong with it. I didn't measure every part out of the circuit
since it started working when removed from the case. I think the next step if to remove it from the
case (again ) and check each and every cap and resistor, fix any that were even a tiny bit off, the power up
and use a scope.
Reply With Quote