View Single Post
  #24  
Old 04-16-2022, 12:10 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Both systems are capable of effecting the performance of each other.

I would check the horizontal output cathode current. If it is excessive it could be lugging down the B+.... Likewise if the H output tube or damper is removed and the horizontal output stops drawing B+ current entirely then the B+ should increase beyond it's nominal design voltage.

The Horizontal output is typically the largest current draw on the B+ so B+ won't be normal if H output current isn't reasonably close to normal.

HV can also be reduced (though you should still get raster) by low B+. If you ever run a set on a Variac and observe reduced HV and usually either blooming or shrunken raster you can see that in action.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote