|
Well, my set has 11 tubes so who knows! I've also found a few other discrepancies, the Sams shows a 6Z10 for audio detector and audio output, but my set just has a 6BQ5. Dunno what's doing the detecting...
I have found a guy here who thinks he has the original service manual for that set, he's going to look for it this weekend.
Meanwhile, I did some more tests. It's not just the 400V that's low, it's all the B+, including the main 405V line. With a cold startup it goes up to about 400V and then drops quickly to around 350V once the various circuits start working.
So in the meantime my big question: is the low B+ a symptom of the problem with the HV? Or is the HV a symptom of a problem with the B+? Or are they likely two unrelated problems and that low B+ may not have anything to do with the lack of HV? Which to tackle first?
I've checked that none of the filters are getting hot, and there's a big 18W dropping resistor in the power supply that isn't getting any hotter than I would expect it to.
|