[liammc00]

This is what happened after I fixed a mistake in the power supply that I made. I plugged the set in and turned TV on the TV ran for a couple of seconds then the casting on side of the flyback cracked an smoke came pouring out of it I immediately unpuged the set. Once it stoped smoking I saw were the flyback blew brown gunck out. I did check bottom of the flyback and insulation has zreo cracks. I have replaced the flyback and set powered on and is kinda working I get a picture but it's very bright and the britness control has no effect nore dose contrast(picture control) on the picture. When the tube is warming up you can see the on screen display but once at full britness you can't. I believe the screen control needs to be adjusted but I'm not sure. I have never worked on Sony before nore have I ever replaced a flyback. I also messed up the tunner some how. I get no reception at all but I believe it was a mistake I made I think I have fixed it but I will no once I test the set.