|
While adjustment of the AGC control does vary the voltage on pin 4, V6, there is no effect on picture. V6 tests ok on tester for emissions.
Biased pin 9 on the agc keyer down to -18 and got a reasonably good pic and sound. So, something’s up with the keying of that system. It’s a straight shot all the way from the flyback to the plate of V6B, so no caps or resistors in the path. Since V6B derives its video sync pulses from the sound sync amp (also V6, section C) there may be a faulty component in this path, possibly a shorted one delivering too much signal to pin 3 and thus biasing the agc negative. Further investigation needed.
|