View Single Post
  #9  
Old 11-03-2021, 03:03 PM
Tube TV's Avatar
Tube TV Tube TV is offline
VideoKarma Member
 
Join Date: Sep 2007
Location: At large again ....
Posts: 788
Yeah another meter is likely your best bet. It would have to be a fairly large meter to have a spring large enough bring the needle back to zero each time.

If the original spring is just bent up you could work the bends out with tweezers on either sides of the bends. They can be a bit bent and look like crap but still work fine as long as the spring isn't binding on anything or rubbing against itself.
Reply With Quote