Quote:
Originally Posted by old_tv_nut
The instant on feature was in no way intended to prolong the iife of anything, and in fact did quite the opposite.
|
I understand that instant on was intended to make a tube TV turn on faster, at the expense of lowering tube life. However, if an external switch is used to remove all power from the TV when not in use, and the external switch is turned on a couple minutes before the TV is turned on, then the instant on feature is used as a “slow start” for the filaments to prevent a current rush.
The DIY tube audio enthusiasts use various slow start circuit designs for their filaments and their B+ to slowly ramp up current into the filaments. A thermistor in the filament circuit seems to be a simple and inexpensive mod to prolong filament life.