View Single Post
  #41  
Old 07-22-2021, 04:07 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
DC coupling (which exists in the circuit) couples any change in the plate voltages to the grids. Changes can happen due to changes in components with temperature and age, or just changing the amplifier tube. DC restoration at the grids would remove such changes due to the preceding stages and would give the most stable result.

Both full (100%) DC coupling and DC restoration give the same result in the picture except that the first one can still drift over time and require readjustment of the gray scale tracking. The reduction in DC coupling by 25% (to 75%) is not really a big improvement in stability, but the designers seem to have thought it worthwhile.

It would make sense to me to try 100% coupling first, and see how well it works and whether it drifts noticeably. If it's OK, you're done; if not, you can proceed with DC restoration.

Maybe the color difference amps cannot make the necessary 33% gain increase; in that case you will need to do the DC restoration; but it's simple enough to try first.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany

Last edited by old_tv_nut; 07-22-2021 at 04:11 PM.
Reply With Quote