View Single Post
  #9  
Old 07-10-2021, 09:08 AM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 548
To me it looks like the picture is severely stretched horizontally.
You do realize that the widescreen (HDTV) aspect ratio of 16:9 won't fit the 4:5 ratio of vintage NTSC screens. I can't see enough of the flat screen to figure out which ratio the video signal is in.
It could be that the width is adjusted far to wide, but I've never seen a vintage TV that would adjust to that extreme so I think it is something else.
It is best to used a still image at this point to trouble shoot, pause the video if you don't have test pattern generator. Something like the CBS eye is a good image but it would have to be on a DVD for your current set up.
I wouldn't worry too much about what the TV is doing tuned off station, without a good video signal the horizontal and vertical sweep circuits won't have a good guide to operate.
Go after one thing at a time, get the picture sweep working right, then work on the video signal (and IF, RF).
Reply With Quote