|
Alignment and test equipment check, see pics. I'm going to spend some time experimenting and teaching myself to do an alignment on the RCA 21D KCS116C.
The sweep generator isn't too healthy but I can adjust the tuning lugs to match various channel number frequencies with a freq counter. Since I'm only concerned with aligning channel 3 or 4 based on what input signal (vcr/dvd combo with digital convertor) I'm focused on Sound and Video IF traps, and tuner alignment for channel 3. Also- I can't get a -6 vdc bias into the video traps to read a 3 volt peak to peak, despite numerous points to check voltages around the 1st, 2nd, and 3d video stages.
When I measure various markers of the BK generator, the waveform on the RCA scope is not a clean sinewave, so I may need to service the scope, more to learn! The waveform looks a bit ragged, and not very focused despite adjusting the scope response.
*It's not the scope, I forgot that calibrating the scope is clean and easy. Faults are *probably* in other equipment.
Last edited by BandDirector; 03-29-2021 at 09:01 PM.
|