After replacing a few more electrolytic caps and the AFC diodes, no real improvement. I figure it's (the bad part) not affecting the vertical like the horiz anyway.
1966-RCA-CTC16XL a.jpg
Then I decided to scope H-osc sync coming from the horizontal AFC diodes, it looks like the trouble may be what is coming out of the AFC network

into pin 2 of 6CG7 H-osc, also where a series RC network 12k resistor and .15mf goes to ground.
I assume this network is meant to "filter" the wave shown below.
1966-RCA-CTC16XL b.jpg